UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter

UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter

Overview of UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter

Model UHZ-10C01(High pressure, ≤6.3MPa) is suitable for high pressure which is ≤6.3MPa, UHZ-10C02( Low Temperature) is suitable for Low Temperature, UHZ-10C03( High Temperature) is appy for the place for high temperature, magnetic level meter is produced and improved based on the advanced technology of same kind products. It is produced accord with Chinese Chemical Industrial Standard HG/T21584-95.

A transducer is consisted of resistance, reed switch and transducer module. The magnetic float’s position changes with the liquid level, which will make the reed switch change its status accordingly, and this change decides the resistance of the current circuit.When the transducer module gets the change of resistance, it will turn it into a 4-20mA current output signal.

Working principle of UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter

The chamber can serve as a part of vessel; it can be connected to the vessel by the upper flange and the down flange. By this way, the liquid level within the chamber is the same as that in the vessel. The signal of level can be showed by the change of flag's status caused by the magnetic float within the chamber.

Main tech data of UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter

Specifics of UHZ-10C01 Magnetic level meter

Range: 0.15～5m

Operating pressure: ≤6.3MPa

Operating temperature: -30℃～+380℃

Chamber material: 304SS

FLoat material: Titanium

Note: Consult factory for higher temperature.

Specifics of UHZ-10C02 Magnetic level meter

Specifics:

Range: 0.15~6m

Pressure: ≤6.3MPa

Temp. :-30℃~+150℃

Chamber Material: 304 SS

Float Material: Titanium

304SS，316SS

Note:Consult factory for higher temperature.

Specifics of UHZ-10C03 Magnetic level meter

Measuring range (mm): 300～1900

Medium density (g/cm3): 0.5～2

Medium viscosity: ≤0.02Pa.S

Working temperature ℃: -40～350

Pressure rating (MPa): ≤32

Measurement accuracy (mm): ≤±10

Installation method: side-mounted, top-mounted, bottom-mounted

Protection level: IP65

Explosion-proof grade: ibⅡCT4 (intrinsically safe type), exdⅡCT4 (explosion-proof type)

Transmission mode: 4～20mA or switch

Interface flange: PN4.5DN25HG20593 (side-mounted type)

Note: Any special design or question of UHZ-10C01 UHZ-10C02 UHZ-10C03 Magnetic level meter, kindly contact the manufacturer for more details.